SK-300 NON-SILICONE PAINTABLE RELEASE (无硅水性脱模剂)
SK-300 NON-SILICONE PAINTABLE RELEASE is an USDA authorized greaseless non-silicone release agent and lubricant specifically formulated for lube and mold releasing processes. It prevents the sticking of all plastics, rubber materials to metal and metal alloy moldings and also penetrates intensively to applied surfaces for that long lasting releasing effects. Will not harm or etch plastics and rubber materials as it does not contain any Trichloroethylene or chlorinated solvents. This product has been proven to gives no less than 10 shots for normal injection processes and it also shows excellent lubricating results on applied areas. It is highly recommended to use on molds, jigs and rubber molding processes and also on areas where lubricity between surfaces and parts are desired. Injected plastic parts need not be cleaned if label and silk screening is required.
Benefits
- Provides excellent penetration for lubricating properties
- Non-CFCs for environmental concern
- Comes in aerosol sprays for easy- to-use applications
- Forms a film for long lasting release
- Multi-purpose application on all plastics and rubber releasing
- non-CFCs and non-ozone depleting.
- Does not contain any chlorinated or halogenated solvents
Application
- Exclusive releasing agent for use in secondary screen-printing processes.
- Suitable for plastic injection parts and components
- No cleaning required after application
- Allows parts to proceed directly to screen-printing procedures.
Technical Specifications
- Clear Colorless Liquid.
- Solvent odor
- Flammable Liquid
Safety & Handling
- Use in a well-ventilated area to avoid inhalation of vapors.
- Avoid contact with eyes and skin. Wear protective gloves and safety goggles during use.
- Do not ingest. If swallowed, seek medical attention immediately.
- Keep away from heat, sparks, open flames, and hot surfaces. Product may be flammable.
- Store in a cool, dry place away from direct sunlight and tightly close the container when not in use.
- Do not puncture or incinerate aerosol cans even when empty.
- Wash hands thoroughly after handling the product.
- In case of eye contact: Rinse immediately with plenty of clean water and seek medical advice.
- In case of skin contact: Wash with soap and water; discontinue use if irritation occurs.
- Dispose of empty containers according to local regulations.
Packaging
Available in 420ML
Special Info Notes
- Meets industry safety and environmental standards
- Free from hazardous air pollutants (HAPs)
- RoHS compliant without heavy metals
Always wear NIOSH-approved protective eye glasses and chemical gloves when using the product.
